Mambo / Joomla! + G2

You are the man, Michiel!

I have upgraded to the latest beta4 (0.9.32) version of Gallery2 and reinstalled the component again. While Gallery2 works fine now that I've disabled short urls in Mambo and standalone (thanks!) I still receive the

error when viewing user management (no new users added to the component view although they existing in gallery2 admin)

Would anyone have any suggestions for this?

Thanks in advance ^^

redline,

you have to install galley2 also, it isn't installed by installing the component.

mosey,
The user manager doesn't show the gallery2 accounts but shows he mambo user base and checks if the exist in G2 user base, not the other way around?

regards,
Michiel

redline,

where did you place the gallery2 folder? try trailing slash.

regards,
Michiel

First of all I instaled Gallery2 and it works fine. I added some albuns and pictures and it's OK. After this I installed Mambo and installed Gallery2 component. All works fine.
Sudenly all my Gallery2 is down. I can see the 3 albuns when I go to standalone adress but when I try to see my Gallery2 inside Mambo the page is redirecined to frontpage.
I'll explain better. When I put the mouse over Gallery menu link I see http://www.mysite.com/index.php?option=com_gallery2&Itemid=2. But when I click menu I'm redirected to http://www.mysite.com/index.php. It's same as frontpage.
What happened? I'm using the last version of Mambo, Gallery2 and component.

I have fresh install of everything. Latest versions as of yesterday. I receive the following error message after clicking on a gallery component menu item I created.

Warning Cannot modify header information - headers already sent in /arch/home/sites/legion/index.php on line 194

Warning Cannot modify header information - headers already sent in /arch/home/sites/legion/index.php on line 195

Warning Cannot modify header information - headers already sent in /arch/home/sites/legion/index.php on line 196

Warning Cannot modify header information - headers already sent in /arch/home/sites/legion/index.php on line 197

Warning Cannot modify header information - headers already sent in /arch/home/sites/legion/index.php on line 198

Ave,

have you changed permission during those 2 days?
change "Login page redirect: /index.php " into "Login page redirect: /index.php?msg=loginredirect"

see what happens

Marticus,

known problem.

regards,
Michiel

I have the same on my localtestsite not on our livesite! But if you outcomment in the index.php:
//header( 'Expires: Mon, 26 Jul 1997 05:00:00 GMT' );
//header( 'Last-Modified: ' . gmdate( 'D, d M Y H:i:s' ) . ' GMT' );
//header( 'Cache-Control: no-store, no-cache, must-revalidate' );
//header( 'Cache-Control: post-check=0, pre-check=0', false );
//header( 'Pragma: no-cache' );

Than the warnings are gone but it's not the right solution! Maybe that michiel_1981 has a clue to fix this?

Hi Michiel.

I add 'view item' to main album permission and it works. All is fine now. Thanks for made me see the problem.

Ave

bug: 7496 user sync bug.
found and fixed in version 2.0.7 for all those people that couldn't sync users.

* comment module finished and ready to ship.
* implanting Mambo date format switch time format is set in mambo language files!

just a update ;)

regards,
Michiel

Here is a work around for the sent headers issue. Rather than completely commenting the following code, we can at least not execute it when viewing the gallery component. Use the 'if {}' block to check if headers have been sent.

if (!headers_sent()) {
  header( 'Expires: Mon, 26 Jul 1997 05:00:00 GMT' );
  header( 'Last-Modified: ' . gmdate( 'D, d M Y H:i:s' ) . ' GMT' );
  header( 'Cache-Control: no-store, no-cache, must-revalidate' );
  header( 'Cache-Control: post-check=0, pre-check=0', false );
  header( 'Pragma: no-cache' );
}

webbee,

if you could give me both thr URLS to mambo and gallery2 standalone and there SERVER paths. I can tell you what they should be.

regards,
Michiel

webbee,

path => /Users/Patrick/Sites/erezi/gallery2/
relative path => ./gallery2 or gallery2
path to mambo => / or /erezi/ or /~Patrick/erezi

try these options, and report back please.

regards,
Michiel

Hello, I'm having a similar problem to webbee with the paths - the path to mambo doesn't seem to be correct and will only save as the default of "/http://paul-murphy.info/mambo/"

The URL for my mambo is "http://www.paul-murphy.info/mambo"
The full path for my mambo is "/home/srgesxwa/public_html/mambo/"
The URL for gallery2 is "http://www.paul-murphy.info/mambo/gallery/"
The full path for gallery2 is "/home/srgesxwa/public_html/mambo/gallery/"

I'm using com_gallery2 v2.0.6
Gallery2 Beta4
and Mambo 4.5.2.

Can anyone help?

Many Thanks
Paul

aviador,

follow the same procedure as show above
path => home/srgesxwa/public_html/mambo/gallery/
relative path => ./gallery
path to mambo => /mambo/

imachavezd,
hopefully this week!

regards,
Michiel

shri,

i have it working, but i need to make near perfect documents or a nice program to make it work ;)

you could try to get it to work, it can be done. but be carefull with your rewrite rules adjustments

regards,
Michiel

d3vlabs and the rest of thecommunity,

It will be released with the rest of the new modules, when i release the new component version.

I have received word from mambojoe and his Community Builder and i'll receive his next relaise and some documents, and will try to integrate some user info to CB.
because this is a feature asked for alot, i'll delay the release of version 2.0.7 until I have finished this.

regards,
Michiel

Hey all, glad I finally found this thread as I have been researching this problem for quite a while now--here it is: thanks in advance!
After installing gallery 1.5 with mambo 4.5.2 and realizing that exec() was permanenlty disabled on my hosting server--
I unistalled g1.5 and installed gallery2 core 0.9.32 with mambo component 2.0.6.B.1
-outside of mambo, ie, directly from the url, i can upload and view pics fine--when I link to G2 from Mambo, it shows fine, but the uploaded pics dont show, yet while it is loading the page, it shows the frame of the pic, and then shrinks down to the text--
The only errors I seemed to be getting is when I went to the "Album Management" part of 'components' in mambo-I got something like this:
nput Array does not match ?: SELECT DISTINCT g2_AccessMap.g_accessListId FROM g2_AccessMap

but then, it just stop producing that error, yet I still cannot see the pics on the frontend of mambo--any ideas?
I hope I was short, eloquent, yet succint--Thank you

btownyouth.com
Ego Eime

Polyphemus,

you have enabled short urls, you should disabled it or set it correctly. including embedded system, as i haven't wrote any documents on this you are on your one, sorry. i'm still busy on making this work for the general not programming community.

regards,
Michiel

Another path problem guys. I've read through everything in this thread and googled but am still having difficulties, so I must be doing something extra stupid

Gallery 2 RC1
com_gallery2 2.0.6
Mambo 4.5.2

Site (Mambo) URL: http://www.shadowsongeurope.com
Gallery URL: http://www.shadowsongeurope.com/gallery2
Full path to gallery: /path/to/usr/shadowsongeurope.com/gallery2/
Relative path to gallery: /gallery2/
Path to Mambo: /

The "Path to Mambo" is where I'm having difficulties. I've tried both "/" as the root directory of the website (which is where mambo is), and the full URL, and also the full server path, and nothing works - it always reports that the path to mambo is incorrect.

Any idea what I'm doing wrong?

That still does not work for me unfortunately. Still get the "Path To Mambo is Incorrect" message.

Bear with me as I'm a Mambo newbie so the integratin was new to me before the G2 RC1 release.

Gallery 2 RC1
com_gallery2 2.0.6
Mambo 4.5.2
Gallery2 Random Image Block v2.3

This was all working for the previous Gallery Beta (flippin' sweet). I actually uninstalled and installed RC1 and now everything works except the Random Image Block which gives this error in place of the random image on the side bar:

Fatal G2 error
Here's the error from G2:
Error (ERROR_CONFIGURATION_REQUIRED)
in modules/core/classes/GalleryEmbed.class at line 761 (gallerystatus::error)
in /home/tonyandn/public_html/modules/mod_gallery_block.php at line 57 (galleryembed::getimageblock)
in /home/tonyandn/public_html/includes/frontend.html.php at line 264
in /home/tonyandn/public_html/includes/frontend.php at line 122 (modules_html::module2)
in /home/tonyandn/public_html/templates/rhuk_solarflare_ii/index.php at line 35
in /home/tonyandn/public_html/index.php at line 204

Any ideas?

here is the sql to create them,

INSERT INTO `mos_gallery2` VALUES ('path', '/home/domain/dir/gallery2/');
INSERT INTO `mos_gallery2` VALUES ('relativeG2Path', './gallery2');
INSERT INTO `mos_gallery2` VALUES ('embedPath', '/');
INSERT INTO `mos_gallery2` VALUES ('loginredirect', '/index.php');

this isn't correct but will get you started.

regards,
Michiel

Hi,

I installed gallery-2.0-rc-1. I have a problem with View Slideshow (fullscreen). If I use it, it starts with loading the Java applet but then it stops at the sort of Slideshow parameters setup program. There's a button at the bottom named Start slideshow but it is disabled. Then some seconds later an error messagebox shows up with the message:

I Gallery Remote can find no protocol implementation at the URL <myurl>. Check with a web browser that <myurl> is a valid Gallery URL.

I did tried installing the Gallery Remote but nothing happens. Is there anything I missed here? Everything works fine except the fullscreen slideshow.

Second, I integrated it with Mambo. I noticed the sidebar module always has a random image on it. How do I disable it? I already have the random image on the Mambo frontpage and I don't want to show it when viewing the gallery itself.

Thanks.

Warning: Invalid argument supplied for foreach() in

/home/d3v/public_html/mambo/g2/modules/core/classes/GalleryTheme.class on line 1383

Latest Mambo
G2 Beta4
Latest Mambo Component

Appears on top of some albums. Does now show in standalone